Learning Plumbing supplies Names are essential for fixing and ma water systems in homes and buildings. Plumbing Supplies Names such as Pipe, faucet, tap, valve, elbow joint, tee joint, coupling, adapter, nipple, union, and reducer. Knowing these plumbing supplies helps in understanding how water systems work and what tools are needed for repairs. given below, let’s learn…
- Pipe
- Faucet
- Tap
- Valve
- Elbow Joint
- Tee Joint
- Coupling
- Adapter
- Nipple
- Union
- Reducer
- Bushing
- Plug
- Cap
- Gasket
- O-ring
- Washer
- Hose
- Pipe Clamp
- Pipe Strap
Plumbing Supplies Names with Pictures
- Pipe:
A long, hollow tube that water or other liquids flow through.
- Faucet:
A device that regulates the water flow through a pipe.
- Tap:
A different term for a faucet that draws water from a pipe.
- Valve:
A tool that regulates the flow of liquid or gas through a pipe.
- Elbow Joint:
A fitting for pipes that supports direction changes, typically at an angle of 90 degrees.
- Tee Joint:
a pipe fitting that enables a T-shaped connection of three pipes at right angles.
- Coupling:
A short pipe used to connect two longer pipes together.
- Adapter:
A fitting used to connect pipes of different sizes or types.
- Nipple:
A short piece of pipe with threads on both ends for connecting two other fittings.
- Union:
A fitting that connects two pipes but allows them to be easily separated.
- Reducer:
A device that joins pipes with varying widths so that one end is smaller than the other.
- Bushing:
A fitting used to connect a larger pipe to a smaller one, usually threaded inside.
- Plug:
a fitting used to seal the end of a pipe.
- Cap:
A fitting that covers the end of a pipe to stop the flow of liquid or gas.
- Gasket:
A ring made of rubber or other material that creates a seal between two surfaces.
- O-ring:
A small, round rubber ring used to seal connections between pipes and fittings.
- Washer:
A small, flat ring that creates a tight seal and stops leaks.
- Hose:
A flexible tube used to convey water or other fluids.
- Pipe Clamp:
An apparatus that fastens a pipe to a wall or another surface.
- Pipe Strap:
A strip of metal or plastic used to hold pipes in place.
Plumbing Supplies Names in English
Plumbing Materials Names in English
- Pipe Hanger
- Pipe Bracket
- Pipe Insulation
- Pipe Tape
- Thread Seal Tape
- Pipe Dope
- Pipe Cutter
- Pipe Bender
- Pipe Wrench
- Basin Wrench
- Adjustable Wrench
- Monkey Wrench
- Pipe Flaring Tool
- Pipe Reamer
- Pipe Deburring Tool
- Pipe Thawing Machine
- Pipe Locator
- Pipe Inspection Camera
- Pipe Cleaning Brush
- Drain Snake
Plumbing Supplies Names and in English
- Pipe Hanger:
A device that supports and holds pipes from above.
- Pipe Bracket:
a pipe support that is often fixed to a wall or ceiling.
- Pipe Insulation:
Substance used to wrap pipes to stop them from freezing and losing heat.
- Pipe Tape:
A tape used to wrap around pipe threads to create a watertight seal.
- Thread Seal Tape:
A tape used to seal pipe threads to prevent leaks.
- Pipe Dope:
A paste that is used on pipe threads to seal them off and stop leaks.
- Pipe Cutter:
A tool used to cut pipes to the desired length.
- Pipe Bender:
A device that bends pipes into a desired angle.
- Pipe Wrench:
A large wrench used to turn pipes and fittings.
- Basin Wrench:
A device for changing the bolts on sink faucets.
- Adjustable Wrench:
A wrench with a moving jaw that can accept different sized bolts and nuts.
- Monkey Wrench:
A particular kind of adjustable wrench for holding and rotating pipes.
- Pipe Flaring Tool:
A tool used to widen the end of a pipe to create a flared connection.
- Pipe Reamer:
A tool used to smooth the inside edges of a cut pipe.
- Pipe Deburring Tool:
An instrument for smoothing the inside of a cut pipe of sharp edges.
- Pipe Thawing Machine:
A machine used to heat and thaw frozen pipes.
- Pipe Locator:
A device used to find the position of underground pipes.
- Pipe Inspection Camera:
A camera used to look inside pipes to check for problems.
- Pipe Cleaning Brush:
A brush used to clean the inside of pipes.
- Drain Snake:
A long, flexible tool used to remove blockages from drains.
Plumbing Supplies Names in English
Plumbing materials Name List in English
- Plunger
- Sink Auger
- Toilet Auger
- Sewer Rod
- Drain Cleaner
- Drain Trap
- Drain Strainer
- Drain Cover
- Drain Tile
- Drain Pipe
- Sump Pump
- Water Pump
- Pressure Tank
- Expansion Tank
- Water Heater
- Water Softener
- Water Filter
- Water Meter
- Water Pressure Gauge
- Water Pressure Regulator
Plumbing Items names and Pictures
- Plunger:
A toilet and sink blockage remover that has a rubber cup.
- Sink Auger:
A tool used to clear clogs in sink drains.
- Toilet Auger:
A tool for clearing toilet drains.
- Sewer Rod:
A long, flexible rod used to clear blockages in sewer pipes.
- Drain Cleaner:
A chemical or tool used to clear clogged drains.
- Drain Trap:
A curved section of pipe under a sink that prevents sewer gases from entering the home.
- Drain Strainer:
An object that covers a drain to collect waste and prevent objects.
- Drain Cover:
A cover that fits over a drain to keep out debris.
- Drain Tile:
A pipe with holes used to collect and carry away excess water.
- Drain Pipe:
A pipe that removes wastewater from fixtures such as sinks and toilets.
- Sump Pump:
A pump used to remove water from a sump pit in a basement or crawlspace.
- Water Pump:
A device used to move water from one place to another.
- Pressure Tank:
A pressure-filled tank used for storing water for plumbing systems.
- Expansion Tank:
A small tank that absorbs excess pressure in a plumbing system.
- Water Heater:
A device that heats water for use in a home or building.
- Water Softener:
A device that removes minerals from water to make it softer.
- Water Filter:
A device that removes impurities from water to make it cleaner.
- Water Meter:
A tool for calculating how much water is used in a building or home.
- Water Pressure Gauge:
A device that measures the pressure of water in a plumbing system.
- Water Pressure Regulator:
A device that controls the pressure of water entering a home or building.
Plumbing Supplies Names in English
100 Supplies Names for Plumbing
- Backflow Preventer
- Check Valve
- Ball Valve
- Gate Valve
- Globe Valve
- Butterfly Valve
- Pressure Relief Valve
- Shut-off Valve
- Angle Stop Valve
- Straight Stop Valve
- Hose Bibb
- Spigot
- Bibcock
- Frost-free Faucet
- Outdoor Faucet
- Kitchen Faucet
- Bathroom Faucet
- Showerhead
- Handheld Showerhead
- Rain Showerhead
Common Supplies Names and Pictures for PlumbingÂ
- Backflow Preventer:
A system that stops tainted water from returning to the main supply.
- Check Valve:
A valve that allows water to flow in one direction only.
- Ball Valve:
A ball-based valve that controls the flow of water.
- Gate Valve:
A valve that uses a gate to control the water flow.
- Globe Valve:
A valve that uses a disk to control the flow of water.
- Butterfly Valve:
A valve that uses a rotating disk to control the flow of water.
- Pressure Relief Valve:
A plumbing system valve for releasing excess pressure.
- Shut-off Valve:
A valve used to stop the flow of water in a plumbing system.
- Angle Stop Valve:
A valve used to stop the flow of water at an angle.
- Straight Stop Valve:
A valve that shuts off water flow in a straight line.
- Hose Bibb:
An outdoor faucet used to connect a garden hose.
- Spigot:
Another word for an outdoor faucet.
- Bibcock:
Another word for an outdoor faucet.
- Frost-free Faucet:
An outdoor faucet designed to prevent freezing.
- Outdoor Faucet:
A faucet located outside a building.
- Kitchen Faucet:
A faucet used in the kitchen sink.
- Bathroom Faucet:
A faucet used in the bathroom sink.
- Showerhead:
A device that sprays water for showering.
- Handheld Showerhead:
A handheld shower head for more convenient use.
- Rain Showerhead:
A large showerhead that simulates the feel of rain.
Plumbing Supplies Names in English
Supplies Names for Plumbing in English
- Body Sprayer
- Shower Arm
- Shower Valve
- Shower Diverter
- Shower Hose
- Shower Curtain Rod
- Shower Drain
- Bathtub
- Bath Spout
- Whirlpool Tub
- Jetted Tub
- Tub Drain
- Tub Overflow
- Tub Faucet
- Tub Spout
- Toilet
- Toilet Seat
- Toilet Bowl
- Toilet Tank
- Toilet Flapper
Pictures and Supplies Names for Plumbing
- Body Sprayer:
A shower head that has numerous angles for spraying water on the body.
- Shower Arm:
A pipe that connects the showerhead to the plumbing system.
- Shower Valve:
A valve that controls the flow and temperature of water in the shower.
- Shower Diverter:
A water-directing valve that is located between the showerhead and a bath outflow or other fixture.
- Shower Hose:
A flexible hose that connects the handheld showerhead to the plumbing system.
- Shower Curtain Rod:
A shower curtain pole that secures the curtain.
- Shower Drain:
A drain that removes water from the shower.
- Bathtub:
A huge bathing container.
- Bath Spout:
A fixture that fills the bathtub with water.
- Whirlpool Tub:
A bathtub with jets that create a whirlpool effect.
- Jetted Tub:
Another term for a whirlpool tub.
- Tub Drain:
A drain that removes water from the bathtub.
- Tub Overflow:
A safety feature that prevents the tub from overflowing by directing excess water to the drain.
- Tub Faucet:
A faucet that fills the bathtub with water.
- Tub Spout:
Another term for a bath spout.
- Toilet:
A fixture used for flushing away waste.
- Toilet Seat:
The seat on which you sit on the toilet.
- Toilet Bowl:
The bowl-shaped part of the toilet that holds waste.
- Toilet Tank:
The tank that holds water for flushing the toilet.
- Toilet Flapper:
A valve inside the toilet tank that controls the release of water for flushing.
Plumbing Supplies Names in English
Also Read:
